DEFA Balancer User Manual

EN
19 defa.com
Setup
Platforms
Smartphone or tablet (Android or iOS).
1. Go to the App Store or Google Play Store, by scanning the QR code shown on the screen of
DEFA Power or below, and download the Power Setup app.
SCA N Q R T O S ET UP
E 21
3 604
SC
AN Q
R
TO S
ET UP
E
2
13
604
2. Open the Power Setup app on your smartphone or tablet.
3. Select the type of configuration needed for your installation and follow the steps and guide in the
Power Setup app.
When DEFA Balancer is installed and commissioned, it is recommended to verify that the DEFA
Balancer operates as intended.

DEFA Balancer Specifications

General

Product name	DEFA Balancer
Product or component type	Current sensor
Product specific application	Load monitoring
Product destination	Switchboard
Tightening torque	0.5Nm
Safety	IEC 61010-1
Maximum current [Imax]	[dependent on current sensor]
Starting current	[min. load current possible to measure]
Supply voltage	100-240 V AC, +/-10%
Power consumption	0.03 A
Maximum input voltage	0.333 VRMS AC
Type of measurement	Current
Accuracy	+/- 2%
Metering type	Current L1, L2 and L3
Range compability	DEFA Power
Frequency	50/60 Hz
Transmission medium	Radio frequency 2.4 GHz or 5 GHz (Wi-Fi), Ethernet
Radio/EMC	2014/53/EU - RED
Antenna connector	SMA female
Cable entry	0.2-2.5 mm2 / (AWG18 - AWG14)
Mounting mode	DIN rail
Number of modular spacings	2
Operating altitude (m.a.s.l)	0.2000 m
Ambient air operating temperature	-25°C to +60°C
Ambient air storing temperature	-30°C to +70°C