12
Orientation
Units
Gage Info
Displays the model number & serial number, PosiSoft.net
registration key, the amount of remaining memory for storage of
readings, date and time, and software packages.
For security purposes, the registration key is required to add the
Gage to your PosiSoft.net account (pg. 14).
Converts the display from psi, MPa, N/mm
2
or Newtons (unit of
force). Existing measurements in memory are not converted.
Switching units closes Memory.
Rotates display between landscape (default) or portrait views.
Ideal for use in horizontal or vertical positions.
Restores factory settings and returns the instrument to a known
condition. The following occurs:
- All batches, stored readings, notes, batch names and screen
captures are erased.
- Menu settings are returned to the following:
Memory = OFF
Pull Parameters = default
Orientation = Landscape
Bluetooth = ON
WiFi = OFF
USB Drive = ON
Date, Time and WiFi are not affected by a Reset.
NOTE:
Units = psi
Backlight = Sun
Language = English
Hold Time:
(up to 60 seconds)
pressure is
maintained (held)
at defined Limit.
Default: 0 seconds.
Hold Time is
displayed on
the pull chart
(shaded area).
Defined
Hold Time
PosiTest AT-A
Reset
To Next Page
Loading...
