11
Memory Menu
New Batch
Open
Close
Delete
Closes any currently opened batch and creates a new memory
batch, named using the lowest available number (example: B2).
New batches are date stamped when they are created.
PosiTest AT-A
The PosiTest AT-A stores 100,000 readings in up to 1,000 batches.
Stored measurements can be reviewed on-screen or accessed via
computers, tablets and smart phones.
For further details on memory options, refer to the full
instruction manual at: www.defelsko.com/manuals
NOTE:
Selects a previously created batch to open and make current.
Stops the recording process, closes the current batch, and
removes batch information from the display.
Removes a batch and associated measurements from memory.
Setup Menu
Pull Parameters
Dolly Size: Select the dolly size being utilized for the test (10,
14, 20 or 50 mm)
Rate: User selectable pull rate (unit/sec). Specified rate is
maintained for the duration of the test.
Limit: Pressure will build-up until the set Limit is reached or the
dolly is pulled from the surface, whichever occurs first. By default,
the instrument will pull to maximum for selected dolly size (see
Technical Specifications pg. 16).
Select desired parameter using the buttons or touch
screen. Use the and buttons to adjust.
To Next Page
Loading...
