13
The instrument automatically attempts synchronization with
PosiSoft.net when initially connected via USB to a PC running
PosiSoft Desktop Manager.
Additional measurements added to memory while
connected are synchronized only when the USB cable is
disconnected, then reconnected or when the Sync Now option is
selected.
Connect Menu
The instrument uses a USB mass storage device which provides a
simple interface to retrieve data in a manner similar to USB flash
drives, cameras or digital audio players.
USB Drive
Allows communication with a smart device running the PosiTector
App (pg.14) via wireless technology. No pairing
required. When connected, measurement data is automatically
transfered. Select Send Now to manually transfer batches (useful
when switching between smart devices).
The instrument will perform a Reset after an update (pg. 12).
Updates
Determines if a software update is available for your instrument.
See www.defelsko.com/update
Allows wireless communication with devices such as tablets,
smart phones and computers connected to your local wireless
network or portable mobile hot spot. See www.defelsko.com/WiFi
WiFi
WARNING:
PosiSoft.net
PosiTest AT-A
Select Sync Now to immediately synchronize stored measurement
data via USB or WiFi to PosiSoft.net (pg.14). PosiSoft Desktop
Manager and an internet connection are required when using USB.
NOTE:
Bluetooth Smart
To Next Page
Loading...
