15
Power Supply / Charging
PosiTest AT-M (manual)
Power Source: Built-in rechargeable NiMH battery**
~60 hours continuous with full charge
The built-in rechargeable NiMH batteries are charged using the
included USB AC power supply/charger. Ensure batteries are
charged prior to use. The battery icon will blink while the
instrument is charging and disappear when fully charged. The
charging process will take up to 14 hours depending on remaining
battery power.
Alternatively, the AC power supply or any computer USB port can
be used to power and charge the instrument.
**Do not attempt to remove or replace the PosiTest AT-M internal NiMH
battery pack. In the unlikely event power issues are experienced,
please contact our technical support for assistance.
PosiTest AT-A (automatic)
Power Source: Built-in rechargeable NiMH battery
>200 pulls with full charge
The built-in rechargeable NiMH batteries are charged using the
included AC power supply/charger. Ensure batteries are charged
prior to use. The USB port will not charge or power the PosiTest
AT-A.
The charging process will take 2-3 hours depending on remaining
battery power. Alternatively, the AC power supply can be used to
power the instrument.
The icon will display while the instrument is charging.
When fully charged the icon will appear.
The PosiTest AT-A internal NiMH battery pack is user
replaceable. In the unlikely event power issues are experienced,
please contact our technical support or your local dealer for OEM
battery pricing, availability and detailed replacement instructions.
NOTE:
To Next Page
Loading...
