Wood block (not included)
Optional
Optional
Optional
Optional
Optional
A. Door bore options
B. Install the lock assemblies
Remove the Battery Cover
Quantity
Thread the cable through the hole and under the latch.
For installation into 1-1/2”(38mm) bore hole, simply pry the adapter collar off with a screwdriver.
WARNING:
If the door needs to be drilled, please be familiar with how to use a drill safely and understand all
of the door preparation steps before proceeding.
^ INSTALLING THE LOCK ASSEMBLIES
Package Contents
The cable must be arranged as shown in the diagram.
Your experience on this site will be improved by allowing cookies. Allow cookies
To Next Page
Loading...