EasyManua.ls Logo

Defiant G7X2D01AA - User Manual

Defiant G7X2D01AA
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
10/24/22, 11:16 AM
Defiant G7X2D01AA Instructions / Assembly
https://mans.io/files/fullviewer/825373
1/19
Defiant G7X2D01AA Instructions / Assembly
G32-KPDA612 Rev. 16/03-00
(/fullviews/1749761/1749761_files/1749761-1.jpg)
3 Pre-installation (continued) – Door Preparation
NOTE: If your door is pre-drilled, check the hole sizes to make sure they are the proper
size. If they are the proper size, skip to the INSTALLATION section.
FOR
(/fullviews/1749761/1749761_files/1749761-2.png)
TOLL FREE HELP LINE 1-877-ONE-LOCK HOMEDEPOT.COM
(/fullviews/1749761/1749761_files/1749761-3.png)
^ Cut out TEMPLATE (reverse page) and use to mark the door, drill holes, and chisel out
the mortise.
Your experience on this site will be improved by allowing cookies. Allow cookies
Question and Answer IconNeed help?

Do you have a question about the Defiant G7X2D01AA and is the answer not in the manual?

Summary

Pre-installation Procedures

Door Preparation and Templating

Steps for preparing the door, including using the template for marking and drilling.

Door Specifications and Warranty

Details on door dimensions, backset, faceplate and warranty information.

Safety Information and Precautions

Key safety warnings and precautions for using the lockset.

Care, Maintenance, and Required Tools

Guidelines for lockset care, maintenance, and the tools needed for installation.

Installation Guide

Installing the Latch and Setting Backset

Step-by-step guide for attaching the latch and adjusting its backset length.

Lock Assembly and Battery Installation

Steps for installing the lock assemblies, connecting cables, and installing batteries.

Part Identification and Mounting Hardware

Identification of lockset parts, including mounting hardware and components.

Lockset Operation

Template Usage and Basic Lock;Unlock

Using the template and understanding basic lock and unlock functions.

Keypad, Buttons, and Manual Controls

Operating the lockset via keypad, buttons, and interior thumbturn.

Locking and Unlocking Methods

Methods for locking and unlocking the lockset using various controls.

Programming the Lockset

Restoring Factory Settings

Steps to restore the lockset to its original factory default settings.

Basic and Advanced Code Management

How to change programming codes, add user codes, and configure advanced settings.

Troubleshooting and Support

Installation and Operation Issues

Resolving common problems encountered during installation and operation.

Code Management and Keypad Issues

Troubleshooting issues related to codes, auto-lock, and keypad response.

Lockset Response and Key Removal Issues

Resolving problems with lockset operation, jam detection, and key removal.

Defiant G7X2D01AA Specifications

General IconGeneral
ModelG7X2D01AA
BrandDefiant
Power SourceBattery
Battery RequiredYes
TypeKeypad