8
Care and Cleaning
□
□
□
Troubleshooting
Problem Possible Cause Solution
The light will not come on.
□ Daylight turn-off (photocell) is in effect. □ Recheck after dark.
□ The motion sensor is aimed in the
wrong direction.
□ Re-aim the motion sensor
to cover the desired area.
The lights stay on continuously. □ The motion sensor may be picking up a
heat source, such as an air vent, dryer
surface.
□ Decrease the “SENSITIVITY”
setting or reposition the
motion sensor.
□ Heat or light from the bulbs may be
turning the motion sensor on and off.
□ Reposition the lamp heads
away from the motion
sensor.
To Next Page
Loading...
