FEATURES
1 Detergent dispenser
See the section detailing the detergent dispenser on the previous page.
2 Rinse and hold
Selecting this feature will stop the machine during the final rinse cycle with water in the
tub. The position on the programme selector knob is marked with
This prevents drip-dry and permanent press articles from waiting in a ‘dry’ machine
before being removed thus minimising creasing.
To complete the programme, press the button once more.
3 Super rinse
Selecting this feature will supply extra rinse water for the rinse cycles and is ideal for use
with highly absorbent fabrics such as towelling.
IMPORTANT:
THIS FEATURE MUST BE SELECTED WHEN WASHING WOOL.
4 No spin
Selecting this feature will eliminate the intermediate and final spin on any programme.
Use in conjunction with the ‘RINSE AND HOLD’ button if desired.
5 On—Off
Push the button for power ‘ON’
Push the button once more for power “OFF’
6 Variable temperature control
This feature may be used only when temperatures colder than those indicated on the wash
guide are required.
i.e. If the programme guide indicates 60ºC and you require a wash temperature of 40ºC ,
then set the control to 40ºC.
NOTE:
IF THE MACHINE IS TO BE OPERATED AT THE RECOMMENDED WASH
GUIDE TEMPERATURES, SET THE TEMPERATURE SELECTOR KNOB AT
85°C.
THIS WILL NOT HARM THE WASH AS THE MACHINE WILL
AUTOMATICALLY SET THE CORRECT TEMPERATURE FOR THE
SELECTED PROGRAMME AND WILL NOT OPERATE AT A
TEMPERATURE HIGHER THAN SPECIFIED IN THE WASH GUIDE.
IF A COLD WASH IS REQUIRED, SET THE CONTROL TO ‘0’
To Next Page
Loading...
Need help?
General