Page 18
Programme table
15
Programme 1 2 3 Reference* 4**** 5 6 7 8
Programme name Pre-wash Mini 30 Economy Quick &
Clean
Intensive Child care Active wash Auto
Cleaning temp. — 35°C 50°C 60°C 70°C 70°C 70°C 40°C to 65°C
Degree of soiling Suitable for
removing the
remnants on
soiled dishes
which wait in
the washer for a
few days.
Suitable for
lightly soiled
dishes used
daily and
scraped clean
Most
economical
programme for
medium soiled
dishes which
have been
kept waiting
Fastest way
to clean daily
medium
soiled dishes
which have
been kept
waiting
Suitable for
heavily
soiled pots
and pans
Suitable for
dishes which
require extra
hygiene. Also
suitable for
heavily soiled
dishes
The best
programme for
the mixed
nature of daily
dishes. Glass
and crystal is
washed in a
sensitive
manner in the
upper basket
while pots and
pans are
washed
vigorously in the
bottom basket
Determines
the degree of
soil and sets
the
temperature,
water level
and wash
time
automatically
Suitable for
all types of
dishes.
—- Little Medium Medium High High Medium Med.—High
Detergents
A=25/15cm³
B=5cm³
—- A A+B A+B A+B A+B A+B A
Sequence
without options
Pre-wash
End
Wash
Cold rinse
Hot rinse
End
Pre-wash
Wash
Cold rinse
Hot rinse
Dry End
Wash
Cold rinse
Hot rinse
Dry
End
Pre-wash
Wash
Cold rinse
Hot rinse
Dry
End
Pre-wash
Wash
Cold rinse
Hot rinse
Hot rinse
Dry
End
Pre-wash
Wash
Cold rinse
Hot rinse
Hot rinse
Dry
End
Automatically
adjusted to
suit degree of
soiling
Duration (minutes) 15 30 178 58 143 124 126 85—179
Water (litres) 4 10.4 13 10.2 16.2 17.8 18.6 10.8 — 14.8
Energy (kWh) —- 0.8 0.97 1.32 1.26 1.97 1.77 0.90—1.50
The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions.
*Reference programme for testing institutes. The testing is in accordance with EN 50242 and must be carried out with a full water softener tank, a full salt dispenser and
a full rinse aid reservoir using the test programme.
****It should be noted that testing is done under a load of 12 place settings. Consumption values are measured under a standard load of 12 place settings
To Next Page
Loading...
Need help?
General
