Page 7
Note:
• Only use rinse aid specifically intended
for dishwashers.
• If composite detergent tablets
containing rinse aid ( 3 in 1 or 2 in 1 )
are used, it is not necessary to fill the
rinse aid dispenser.
Rinse aid prevents water and calcium
streaking on dishes and speeds up the drying
process.
The rinse aid dispenser is to the right of the
detergent compartment.
To add rinse aid, proceed as follows:
• Open the rinse aid dispenser by pressing
the locking lever. (B)
• Carefully pour the rinse aid into the
dispenser to the MAX mark.
• Close the lid.
• Carefully wipe off any spilt rinse aid.
• The dispenser regulator (4) may be set
between 1 and 6.
If lime marks appear after washing,
select a lower setting.
If water marks appear after washing
select a higher one.
A rinse aid sight glass (3) allows inspection
of the rise aid level in the dispenser. If the
rinse aid appears to be diluted or is lighter in
colour, it needs to be replenished.
Adding rinse aid
7
To Next Page
Loading...
Need help?
General
