Defy DTD 297 User Manual

17 - EN
6 Quick instructions for daily use
Preparation and starting
1. Pressthe“On/Off”button.
2. Placethelaundryinthemachine.
2. Select the program.
3. Close the loading door.
4. Press“Start/Pause/Cancel”button.
Canceling a program
A new program can be selected and started
after“Programcancel”isactivatedinorderto
change the drying program.
In order to cancel the selected program,
press"Start/Pause/Cancel"buttonforabout
3 seconds. The “Filter cleaning”, "Water tank"
and "End/ Anti-creasing” warning LEDs will
light up at the end of this period for reminding
purposes.
Adding laundry
In order to add laundry after the start-up of the
program:
1. Press“Start/Pause/Cancel”button.
2. Opentheloadingdoorandputthe
laundry in.
3. Close the loading door.
4. Press"Start/Pause/Cancel"buttonto
start the program.
Changing the program after the program
has started
Youcanusethisfeatureafteryourmachine
has started to dry your clothes under higher or
lowertemperatures.Pressandholdthe“Start/
Pause/Cancel”buttonforabout3secondsto
switch the machine into the “Cancel” status
in order to change the program. Change the
programandpress"Start/Pause/Cancel"
button to start it.
After the program is finished
The “End/Anti-creasing” and “Filter cleaning”
warning LEDs as well as "Water tank" warning
LED in some models on the program follow
up indicator will light up when the program
comes to an end. The door can be opened
and the machine becomes ready for a second
cycle.
1. Pressthe“On/Off”buttontoshutdown
the machine.
2. Take out the laundry from the machine.
3. Check if there are any foreign substances
in the machine.
4. Clean the filter after drying. Also drain the
water tank in models equipped with a
condenser.

Defy DTD 297 Specifications

General

Brand	Defy
Model	DTD 297
Category	Dryer
Language	English