Degritter MARK II - Page 40

40
11 Troubleshooting guide
MACHINE MAINTENANCEMACHINE MAINTENANCE
Aer every 50 washing programs,
the machine will automatically run
a quick maintenance cycle and
will then continue with the selected
program.
The maintenance cycle will pump
water back and foh through the
valves in order to clean potential
debris from them. The cycle will take
under 1 minute.
Water droplets on record
after drying
The maintenance program is run
every 50 cycles with an oset of 10.
This means that the program will
a on the 60th, 110th, 160th, 210th
cycles and so on.
Machine maintenance cycle can be
aed manually. To do so, navigate
to the Degas program in the menu.
Press and hold the le button and
immediately press the right button.