Degritter MARK II - System Errors and Warnings

44
11 Troubleshooting guide
Fans are on after
program has finished
Display has scrambled
sections
Machine is starting
programs automatically
Display upside down
Fans are on after program
has finished
Display upside down
Display has scrambled
sections
Warning: Add Water
Machine is starting
programs automatically
The machine monitors the tem-
perature of its internals. Once the
temperature exceeds 28 °C or 83 °F,
the machine will cool itself to better
prepare for the next washing cycle,
even while in idle mode. The fans
will op automatically when the
temperature has been suiciently
lowered.
During the machine’s transpo, sec-
tions of its memory may have been
exposed to rong electromagnetic
inteerence. Flashing the soware
again from the SD card will solve
the issue.
An automated teing program has
been accidentally enabled from the
menu. Turning the machine o from
the switch on the back, waiting 10s
for the capacitors to discharge and
turning the machine back on again
will disable this function.
The issue is caused by a rare glitch
in the soware. Reaing the unit
will solve it.