DEHLER 25Cr
11
Technical Regulations
Appendix to the Statement of Conformity or Manufacturer’s Certificate
Relevant Standards and/or Technical Regulations
listed in the same order as in Annex I and Annex II of the Directive
Annex I
1 Design Category Annex I
2 Principal data pr EN ISO 8666
2.1 Hull Identification Number EN ISO 10087
2.2 Manufacturer’s Plate prEN ISO 14945
prEN ISO 11192
2.3 Protection against falling overboard ISO/DIS 15085
2.4 Field of vision from taken position prEN ISO 11591
2.5 Owner’s Manual EN ISO 10240
3.1 Dimensions prEN ISO 12215 (6 parts)
3.2 Stability, freeboard prEN ISO 12217 (3 parts)
3.3 Buoyancy, floating capacity EN ISO 12217 (3 parts)
3.4 Openings, hatches, windows prEN ISO 12216
EN ISO 9093 (2parts)
3.5 Flooding prEN ISO 11812
3.6 Recommended maximum load prEN ISO 14946
3.7 Storage space for life-rafts ------
3.8 Emergency escape ------
3.9 Anchoring, mooring, towing EN ISO 15084
4 Engine power, manoevring capacily prEN ISO 11592
DIN EN ISO 8665
5.1 Engine system and engine compartment DIN EN ISO 16147
5.2 Fuel system prEN ISO 10088
DIN EN ISO 7840
DIN EN ISO 8469
5.3 Electrical system
- Bilge pumpe EN 28849/ ISO 8849
- Ventilatoren DIN EN ISO 9097
- Direct current systems DIN EN ISO 10133
- Alternating current systems DIN EN ISO 13297
5.4 Steering systems EN 28848/ ISO 8848
- cable steering EN 28847/ ISO 8847
- sprocket steering prEN ISO 13929
5.5 Liquid gas systems peEN ISO 10239
5.6 Fire protection DIN EN ISO 9094-1
5.8 Waste water prEN ISO 8099
To Next Page
Loading...
