Need help?Do you have a question about the Dehler 39 and is the answer not in the manual?
Explains the meaning and location of various warning and information stickers on the boat.
Details the boat's design category and hull identification number structure.
Explains data on the manufacturer's plate and the EC Statement of Conformity.
Lists applied standards and technical regulations relevant to boat construction and safety.
Provides key physical dimensions, draft, and transport height specifications.
Details sail areas and the boat's weight specifications with different keels.
Information on the standard and optional engine installations and their specifications.
Covers 230V AC and 12V DC systems, including battery capacities.
Lists capacities for fresh water, fuel, and waste water tanks.
Specifies maximum persons, additional load, and crane lifting points.
Illustrates the internal layout for 2-cabin and 3-cabin versions of the boat.
Shows the arrangement of deck fittings, hatches, and equipment.
Details sail dimensions, mast length, and boom length for sailing performance.
Specifies dimensions and types of shrouds, stays, and running rigging components.
Provides hints for rigging and sail maintenance, especially for winter storage.
Covers engine installation, exhaust, propeller, fuel system, and maintenance.
Details cold and hot water systems, including tank, pump, and heat exchanger.
Explains the waste water pump and fresh water shut-off valve installation.
Details the 230V shore connection unit, charging unit, and AC system warnings.
Covers fuses, switch boards, battery charging, wiring, and system indications.
Explains bilge pump types, operation, and system components.
Details the rudder assembly, maintenance, and emergency steering.
Covers gas cooker installation, handling, safety precautions, and certification.
Explains the pump toilet, holding tank, emptying procedures, and maintenance.
Outlines preventive measures for fire protection on board.
Identifies fire extinguisher locations and provides firefighting guidance.
Describes the diesel heating system, temperature control, and components.
Lists and illustrates various board outlets for different systems and cabin versions.
Covers cabin bilge, helm hollow drainage, and leak stop measures.
Provides guidance on checking board outlets for leaks and electrolysis.
Details procedures for fuel filling, oil changes, rubbish, and holding tank management.
Covers noise reduction, exhaust fumes, antifouling paint, and paint remover use.
Describes anchor types, chain, and proper usage.
Specifies types, lengths, and materials for mooring and towing ropes.
Lists essential checks before sailing related to anchoring and mooring gear.
Guides on inspecting and maintaining the hull, deck, and rigging.
Covers cleaning, ventilation, electrical system checks, and tank care.
Provides essential steps and considerations for proper winter storage of the yacht.
To Next Page
General
