Manual DEHLER 39
14 - 72
1.9 Technical Regulations
Attachment to the Statement of Conformity or Manufacturer’s Certificate
Applied Standards and/or Technical Regulations
listed in the same order as in Annex I and Annex II of the Directive
Annex I
1 Design Category Annex I
2.1 Hull Identification Number EN ISO 10087
2.2 Manufacturer’s Plate ISO/WD 14945
2.3 Protection against falling overboard ISO/WD 15085
2.5 Owner’s Manual EN ISO 10240
3.1 Sizing ISO/WD 12215 (6 Volumes)
3.2 Stability, free board ISO/WD 12217 (3 Volumes)
3.3 Buoyancy, floating capacity ISO/WD 12217 (3 Volumes)
3.4 Openings, hatches, windows ISO/DIS 12216
3.5 Flooding
- Cockpit, Cockpit drainage ISO/CD 11812
- Bilge system ISO/WD 15083
3.6 Recommended maximum load ISO/WD 14946
3.7 Storage space for lifeboats ------
3.8 Emergency escape
- (fire protection) ISO/DIS 9094
3.9 Anchoring, mooring, towing ISO/WD 15084
4 Engine power, manoeuvring capacity ISO/CD 11592
5.1 Engine system and engine room
- Steam, noise, heat ICOMIA-Standard in preparation
- Ventilation ISO 11105 (Petrol)
- Exposed parts Annex I
5.2 Fuel system ISO 10088
5.3 Electrical system
- Direct current systems ISO 10133
- Alternating current systems ISO 13297
5.4 Steering systems (5 standards see construction elements)
- Auxiliary rudder Annex I
5.5 Liquid gas systems ISO/DIS 10239.2
5.6 Fire protection ISO/DIS 9094
5.7 Navigation lights National Regulations
5.8 Sewage ISO 8099
- Waste water tank
- Holding and preparation systems
- Black water tanks