Dehler 39 - Halyard Running; Main Sheet Running; Furling Genua; Main Sheet Traveller

Manual DEHLER 39
24 - 72
3.4.3 Halyard running
1. Top shroud
2. Spinnaker halyard
3. Main halyard
4. Reefing1
5. Outhaul
6. Main boom kicking strap
7. free
8. Reefing 2
9. Jib halyard
10. Spinnaker halyard 2
11. Spinnaker boom kicking
strap
( optional )
12. Spinnaker boom kicking
strap
( optional )
3.4.4 Main sheet running
Standard: Mainsheethaul
1:4/1:8. If you pull both ends
of sheet, it is1:4. If you pull
only one end it is 1:8.
FIGURE.: Halyard running
Optional: With optional mainsheet winches one part of the sheet is fastened at each winch.
Needed power is devided 1:2.
3.4.5 Furling genua / Main sheet traveller
As an option, the three furlings can be adjusted without graduation from the cockpit. The
adjustable top setting of the furling genua makes a lot of sense with a frontsail roller reefing
installation.