3.2 LED functions
The display unit holds 10 LED functions. The colour is green or red or a combination in different situations.
The display LEDs are indicating as follows:
1. User-configurable LED
2. LED indicates that the auxiliary supply is switched on
3. LED flashing indicates that unacknowledged alarms are present. LED fixed light indicates that ALL alarms
are acknowledged, but some are still present
4. Off mode
5. Semi-auto mode
6. Manual mode
7. Auto mode
8. LED is green if the mains is present and OK. LED is red at a mains failure. LED is flashing green when
the mains returns during the "mains OK delay" time
9. LED indicates that the mains breaker is closed
10. LED indicates that the generator breaker is closed
11. LED green light indicates that the voltage/frequency is present and OK
12. LED indicates that the generator is running
AGC 200 operators manual 4189340607
UK
Display, push-buttons and LEDs
DEIF A/S Page 11 of 24
To Next Page
Loading...
