Need help?Do you have a question about the Deif DELOMATIC 4 Series and is the answer not in the manual?
General| Protection class | IP20 |
|---|---|
| Humidity | 5-95% (non-condensing) |
| Communication Ports | RS485, Ethernet |
| Number of Analog Inputs | 4 |
| Number of Analog Outputs | 4 |
| Dimensions | 144 x 144 mm |
Overview of DEIF Delomatic 4 for GAS/HYDRO applications and TCP/IP setup.
Target audience for this document, primarily panel builder designers.
Explanation of the document's chapter organization for user convenience.
DEIF's disclaimer on installation, operation, and warranty conditions.
Essential safety measures to protect against static discharge during installation.
Warnings regarding dangerous currents/voltages and the need for authorized personnel.
Clarification on how notes and warnings are presented for emphasis.
Summary of DM-4 TCP/IP communication, available changes, and PCM module checking.
Steps to connect PC to DM-4 via Ethernet and access via web browser.
Alternative method for software verification using Telnet from the command prompt.
Guide on modifying PC IP settings for establishing connection with the DM-4.
Instructions on how to change the DM-4's IP address and related network settings.
To Next Page
