dejavoo P3 - Page 3

PaymentCloud LLC. • 800-988-2215 • support@paymentcloudinc.com
Table of Contents
Additional Information
3V.102024
Dejavoo P3
User Manual & Setup Guide
Spec Sheet
Shop Dejavoo P3
How to Load Paper Roll into the Attached Printer
1. Hold the device in both hands.
2. Pinch the sides of the top of the device up next to the credit
card tap section.
3. Flip the top away from the device screen.
4. Insert the receipt paper into the slot of the terminal’s printer.
The paper size should be about 50ft.
5. Roll out some of the receipt paper so that the top is closed
and the end of the paper is left out.
How to Turn On/Off
1. Press the POWER button on the side of the terminal and
hold until a menu displays the following options: POWER
OFF, REBOOT, AIRPLANE MODE, and SILENT MODE.
2. Select your preferred option.
How to Set Up an Ethernet or Wifi connection
1. Click the gear icon on the main menu.
2. Input the manager password (1234).
3. Select COMM SETUP.
4. Select your network of choice.
5. Tap on GPRS.
6. Enter the password if prompted, after which it will congure.
Dejavoo P3 - Default Password
The default password for the Dejavoo P3 is 1234
How to Register a SIM Card
1. Open the Dejavoo Systems portal.
2. Select your monthly plan. If you have an AT&T SIM card, you
must choose an AT&T monthly plan. If you have a Verizon
SIM card, you must choose a Verizon monthly plan.
3. Choose your subscription plan from the options that appear
in the drop-down menu. Details of the plan will be displayed
on the left, based on your plan selection.
4. Enter your email address and create a password.
5. Enter your credit card details.
6. If your billing address and your postal address are the same,
click the box, and the elds will automatically populate with
your billing address. If it is different, enter your address
details.
7. Enter your billing contact phone number.
Setup
Setup
3
Accept Payments
5
Rights Reserved
10
Settings
8
Troubleshooting
& Tips
9
Overview
2