dejavoo Z8 - COMMUNICATION AND BATCH MANAGEMENT; COMMUNICATION SETTINGS

Dejavoo Systems Instruction Manual V525.15 77
COMMUNICATION SETTINGS (MODEM)
The following options enable edits to the following modem communication parameters:
 Dialing Prefix  Dialing Suffix  Dial Type
The definition of each modem communication parameter is as follows:
Dialing Prefix When a number (i.e.: 9) is needed before a phone # to dial out.
Dialing Suffix When a number (i.e.: 9) is needed after a phone # to dial out.
Dial Type Sets the dial to either Touch Tone or Pulse dial.
Use the steps below to edit the terminals global communication settings from the Core Menu:
Step
Action
Display
1.
From the idle prompt press the OK key to access
the Core Menu.
2.
NON TOUCH SCREEN TOUCH SCREEN
Using the down arrow
key highlight the word
UTILITY and press OK
* If prompted input
password, default is 1234
Using your fingertip
TAP the word UTILITY
* If prompted input
password, default is 1234
3.
NON TOUCH SCREEN TOUCH SCREEN
Using the down arrow
key highlight the word
COMMUNICATIONS
and press OK
Using your fingertip
TAP the word
COMMUNICATIONS
4.
NON TOUCH SCREEN TOUCH SCREEN
Use the #down arrow
key to highlight LOCAL
PARAMS and press
OK
Using your fingertip
TAP the words LOCAL
PARAMS
5.
NON TOUCH SCREEN TOUCH SCREEN
Use the #down arrow
key to highlight
MODEM and press OK
Using your fingertip
TAP the word MODEM
Continued on next page
Settlement ->
Reports ->
Favorites ->
Utility ->
Retrieve Password ->
Core Menu
Utility ->
Settings _>
Software Downalod ->
Favorites ->
Security ->
UTILITY
Communications ->
Print Details
Mom’s Bday
Remote Parms ->
Communications
Local Params ->
Local Parameters
Ethernet ->
Modem ->
Credit I SALE
Enter Amount