Delfi PTS ii - Electromagnetic Compatibility (EMC)

OPERATING INSTRUCTIONS
42 OPERATING INSTRUCTIONS
2
Error Code
Problem
Possible Causes and Corrective Actions
E0029
Alarm system
failures
• One or more components of the audiovisual alarm system has failed
• Note error code and the accompanied numeric code (if any) and contact Delfi
ELECTROMAGNETIC COMPATIBILITY (EMC) GUIDANCE TABLES
The following tables provide guidance on needs and installation of the PTS ii regarding electromagnetic compatibility.
EMC GUIDANCE AND DECLARATION - EM EMISSIONS
Guidance and Manufacturer's Declaration - Electromagnetic Emissions
The PTS ii Personalized Tourniquet System is intended for use in the electromagnetic environment specified below.
The user of the PTS ii should ensure that it is used in such an environment.
Emissions Test
Compliance
Electromagnetic Environment Guidance
RF emissions
CISPIR 11
Group 1
The system’s RF emissions are very low, therefore, are not likely
to cause interference in nearby electronic equipment.
RF emissions
CISPIR 11
Class A
The PTS ii is suitable for use in all establishments other than
those directly connected to the public low voltage power supply
network that supplies buildings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/flicker
emissions
IEC 61000-3-3
Complies