Dell EMC Data Domain DS60 - Page 13

Figure 2 Fans and disk drives inside the disk enclosure
Table 5 LED status lights
Light Quantity Color Meaning
Disk Active
Note
Only visible after the
disk enclosure is
opened.
1 per disk module Blue
l
No LED when the
slot is empty or
has a filler
module. Also, off
when the disk is
powered down by
command; for
example, the
result of a
temperature
fault.
l
Fast blinking
when the SAS
drive is powered
up but not
spinning; this is a
normal part of the
spin-up
sequence,
occurring during
the spin-up
delays of a slot.
l
On when the
drive has power
but is not handing
any I/O activity
(the ready state).
DS60 Shelf Installation Overview
Disk enclosure interior 13