4. To verify that the system is in good running condition and shows no errors,
enter the enclosure show topology command:
# enclosure show topology
Port enc.ctrl.port enc.ctrl.port
---- - ------------- - -------------
5a
5b
5c
5d
6a
6b
6c
6d
7a > 5.B.H: 5.B.E
7b > 6.A.H: 6.A.E
7c > 4.B.H: 4.B.E
7d > 2.A.H: 2.A.E > 3.A.H: 3.A.E
8a > 5.A.H: 5.A.E
8b > 6.B.H: 6.B.E
8c > 4.A.H: 4.A.E
8d > 3.B.H: 3.B.E > 2.B.H: 2.B.E
---- - ------------- - -------------
Encl WWN Serial #
---- ---------------- --------------
2 N/A JWXCD143700040
3 N/A JWXCD143600036
4 N/A APM00111103491
5 N/A APM00133421015
6 N/A APM00111103544
---- ---------------- --------------
Error Message:
-----------------
No error detected
-----------------
ES20 rear view:
CONTROLLER-B CONTROLLER-A OP-PANEL
+--------------------------------------------------------+
| | E | H | |
| | | | |
| | H | E | |
+--------------------------------------------------------+
ES30 rear view:
+--------------------------------------------------------+
CONTROLLER-B | E
H |
+--------------------------------------------------------+
+--------------------------------------------------------+
CONTROLLER-A | H
E |
+--------------------------------------------------------+
Understanding the DS60 disk mappings
The 60 disks contained in a DS60 shelf are divided into four disk packs of 15 disks
each. Table 17 on page 92 shows the logical layout of a single disk pack.
Post-Installation Tasks
Understanding the DS60 disk mappings 91
To Next Page
Loading...
