Table 15 DD6300, DD6800 and DD9300 I/O module slot assignments (continued)
Slot Number DD6300 DD6800 DD9300
1 10GbE 10GbE 10GbE
2 Reserved SAS SAS
3 SAS SAS SAS
4 FC, Ethernet or
empty
FC, Ethernet or empty FC, Ethernet or empty
5 FC, Ethernet or
empty
FC, Ethernet or empty FC, Ethernet or empty
6 FC, Ethernet or
empty
FC, Ethernet or empty FC, Ethernet or empty
7 Empty SAS SAS
DD9500 and DD9800 systems
In the rear of the system, the top section contains the 4 power supply units. In the
middle of the section, on the left, is serial number tag location. To the right of the
serial number tag location is the management module. The lower section contains the
NVRAM and the I/O modules numbered 0 through 11 from left to right.
I/O module slot assignments
The following figure shows the location of the NVRAM and I/O modules.
Figure 55
Location of NVRAM and I/O modules
1. NVRAM module—slot 0
2. I/O modules—slots 1 to 11 (See the I/O module slot assignments table.)
Data Domain-Specific Installation
84 Data Domain DS60 Expansion Shelf Hardware Guide
To Next Page
Loading...
