Figure 3 Drives as packs
The next table shows how the drives are distributed by packs (groups) and numbered
physically. The bottom of the table represents the front of the shelf
Table 6
Physical drives
Rows Pack 1 Pack 2 Pack 3 Pack 4
E 0-2 3-5 6-8 9-11
D 0-2 3-5 6-8 9-11
C 0-2 3-5 6-8 9-11
B 0-2 3-5 6-8 9-11
A 0-2 3-5 6-8 9-11
Although the disk numbers are physically 0 to 59, the disks are reported logically by
system software commands in two ways:
l
A range from 1 to 60, usually reported with the enclosure number (e.g. 3.37)
l
The position matrix A-E (1-12)
For part replacement information, refer to the
DS60 Expansion Shelf Installation and
FRU Replacement Guide.
DS60 Shelf Installation Overview
Disk enclosure interior 15
To Next Page
Loading...
