EasyManua.ls Logo

Dell EMC Data Domain DS60 - Page 96

Dell EMC Data Domain DS60
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
dg3 2.4-2.6, 2.16-2.18, 2.28-2.30, 14 2.7 TiB
2.40-2.42, 2.53-2.54
dg4 4.1-4.14 14 1.8 TiB
dg5 6.1-6.14 14 1.8 TiB
(spare) 2.52 1 2.7 TiB
(spare) 5.15 1 3.6 TiB
(available) 4.15 1 1.8 TiB
(available) 6.15 1 1.8 TiB
----------- ------------------------------ ----- -------- -----------
Current active tier size: 120.0 TiB
Active tier maximum capacity: 261.9 TiB
Storage addable disks:
Disk Disks Count Disk Enclosure Shelf Capacity
Additional
Type Size Model License Needed
Information
--------- ------------------------------- ----- -------- ------- --------------
-----------
(unknown) 2.1-2.3, 2.13-2.15, 2.25-2.27, 15 2.7 TiB DS60 32.7 TiB
pack 1
2.37-2.39, 2.49-2.51
(unknown) 2.7-2.9, 2.19-2.21, 2.31-2.33, 15 2.7 TiB DS60 32.7 TiB
pack 3
2.43-2.45, 2.55-2.57
(unknown) 2.10-2.12, 2.22-2.24, 2.34-2.36, 15 2.7 TiB DS60 32.7 TiB
pack 4
2.46-2.48, 2.58-2.60
(unknown) 3.1-3.3, 3.13-3.15, 3.25-3.27, 15 2.7 TiB DS60 32.7 TiB
pack 1
3.37-3.39, 3.49-3.51
(unknown) 3.4-3.6, 3.16-3.18, 3.28-3.30, 15 2.7 TiB DS60 32.7 TiB
pack 2
3.40-3.42, 3.52-3.54
(unknown) 3.7-3.9, 3.19-3.21, 3.31-3.33, 15 2.7 TiB DS60 32.7 TiB
pack 3
3.43-3.45, 3.55-3.57
(unknown) 3.10-3.12, 3.22-3.24, 3.34-3.36, 15 2.7 TiB DS60 32.7 TiB
pack 4
3.46-3.48, 3.58-3.60
--------- -------------------------------- ----- -------- -------- --------------
-----------
Shelf Capacity License:
License Model Total Used Remaining
--------------- ----- --------- -------- ---------
CAPACITY-ACTIVE ES30 109.1 TiB 87.3 TiB 21.8 TiB
CAPACITY-ACTIVE DS60 152.7 TiB 32.7 TiB 120.0 TiB
--------------- ----- --------- -------- ---------
One disk in a shelf is a spare disk. The rest should report that they are
available.
3. Enter the filesys expand command to allow the file system to use these
enclosure disks:
# filesys expand
4. Enter the filesys enable command to enable the file system:
# filesys enable
5. Enter the disk show state command to verify the disks:
# disk show state
Enclosure Disk
Row(disk-id) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
-------------- ----------------------------------------------
1 . . .
Post-Installation Tasks
96 Data Domain DS60 Expansion Shelf Hardware Guide

Related product manuals