Palm-rest assembly
Removing the palm-rest assembly
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Enter service mode.
3. Remove the SIM card.
4. Remove the microSD card.
5. Remove the base cover.
6. Remove the WLAN card.
7. Remove the WWAN card.
8. Remove the memory module.
9. Remove the solid-state drive.
10. Remove the battery.
11. Remove the assembly inner frame.
12. Remove the system board.
13. Remove the smart card reader.
14. Remove the LED board.
15. Remove the power-button board.
16. Remove the keyboard assembly.
17. Remove the display assembly.
About this task
The following image indicates the palm-rest assembly and provides a visual representation of the removal procedure.
Steps
After performing the steps in the pre-requisites, we are left with the palm-rest assembly.
84
Removing and installing components
To Next Page
Loading...
