NOTE: Heat dissipation is calculated using the PSU wattage rating.
NOTE: This system is also designed to connect to the IT power systems with a phase to phase voltage not exceeding 240
V.
NOTE: PSUs rated for 1100 W AC or 1100 W Mixed Mode HVDC and higher require high-line voltage (200–240 V AC) to
supply their rated capacity.
System dimensions
This section describes the physical dimensions of the system.
Figure 36. System dimensions of PowerEdge R7425 system
Table 31. Dimensions
System Xa Xb Y Za (with
bezel)
Za (without
bezel)
Zb Zc
PowerEdge R7425 482.0 mm
(18.98
inches)
434.0 mm
(17.09
inches)
86.8 mm
(3.42 inches)
35.84 mm
(1.41 inches)
22.0 mm
(0.87 inches)
677.3 mm
(26.66
inches)
715.63 mm
(28.17
inches)
65
To Next Page
Loading...
