Preface
As part of an effort to improve its product lines, Dell EMC periodically releases
revisions of its software and hardware. Therefore, some functions described in this
document might not be supported by all versions of the software or hardware
currently in use. The product release notes provide the most up-to-date information
on product features.
Contact your Dell EMC representative if a product does not function properly or does
not function as described in this document.
This document was accurate at publication time. New versions of this document might
be released on Dell EMC Online Support (https://support.emc.com). Check to ensure
that you are using the latest version of this document.
Purpose
This document describes best practices for connecting AC power to the following
PowerMax arrays:
l
PowerMax 2000
l
PowerMax 8000
Audience
This document is intended for customers who are installing a PowerMax array and
must assure that fault tolerant AC power is supplied to the arrays from independent,
customer-supplied, power distribution units (PDUs).
Related documentation
Dell EMC PowerMax Family Product Guide
Provides information on PowerMax 2000 and 8000 arrays with PowerMaxOS
5978.
Dell EMC PowerMax Family Site Planning Guide
Provides planning information regarding the purchase and installation of a
PowerMax 2000, 8000 with PowerMaxOS.
PowerMaxOS 5978.144.144 Release Notes for Dell EMC PowerMax and All Flash
Describes new features and any limitations.
Dell EMC PowerMax Family Security Configuration Guide
Shows how to securely deploy PowerMax arrays running PowerMaxOS.
Special notice conventions used in this document
Dell EMC uses the following conventions for special notices:
To Next Page
Loading...
Need help?
General
