Need help?Do you have a question about the Dell EMC SC5020 and is the answer not in the manual?
General| Form Factor | 2U |
|---|---|
| Drive Types Supported | SSD, HDD |
| Controller Configuration | Dual Controller |
| Processor | Intel Xeon |
| Storage Type | Hybrid Flash |
| RAID Levels Supported | RAID 0, 1, 5, 6, 10 |
| Host Connectivity | Fibre Channel, iSCSI |
| Host Interface | 16Gb FC, 10Gb iSCSI |
| Protocols | FC, iSCSI |
| Power Supply | Dual redundant power supplies |
| Management Software | Dell EMC Storage Manager |
| Operating System | Dell EMC Storage Center OS |
Tracks changes and updates to the manual over time.
Identifies the intended users of the manual.
Provides information on how to get support from Dell.
Details the components and indicators on the front of the storage system.
Describes the components and indicators on the back of the storage system.
Information about the types, installation, and indicators of storage drives.
Explains the numbering scheme for drives within the storage system.
Details the features and LED indicators on the storage controller.
Essential safety guidelines for handling storage system components and preventing injury or damage.
Instructions for removing and installing the front bezel of the storage system.
Procedures for identifying, removing, and installing hard drives in the storage system.
Steps to identify and replace power supply and cooling fan modules.
Procedures for working with, removing, and installing storage controllers and service baffles.
Step-by-step guide for installing a storage controller into the chassis.
Detailed instructions for replacing a malfunctioning storage controller with a new one.
Procedures for removing and installing the cover of the storage controller.
Instructions for removing and installing the battery backup unit within the storage controller.
Guide for removing and installing Riser 1, including electrostatic discharge precautions.
Procedures for removing and installing I/O cards on Riser 1.
Instructions for removing and installing mezzanine cards, including blank slot covers.
Steps for removing and installing rack rails for the storage system.
Procedure for powering on the storage center and expansion enclosures after an outage or shutdown.
Comprehensive technical details, including drives, controllers, connectivity, and RAID configurations.
To Next Page