Need help?Do you have a question about the Dell EMC PowerScale F200 and is the answer not in the manual?
General| Model | PowerScale F200 |
|---|---|
| Storage Type | Scale-out NAS |
| Form Factor | 2U |
| Network Interface | 10/25/40/100 GbE |
| Power Supply | Redundant power supplies |
| Operating System | OneFS |
| Protocol Support | NFS, SMB, S3 |
| Drive Types | SSD |
| Processors | Dual Intel Xeon |
| Processor | Intel Xeon Scalable |
| Memory | 128GB per node |
| Throughput | Up to 270 GB/s per cluster |
Details NVMe, SEDs, and SAS SSDs supported by the nodes for data storage.
Step-by-step guide for installing the sliding rails into the equipment cabinet.
Procedure for physically placing the node into the cabinet's installed rails.
Guidance on connecting power and data cables, and routing them neatly.
Overview of creating a new cluster or adding a node to an existing one.
Instructions for using the automated wizard for node and cluster configuration.
Explanation of the node's LCD display, its status indicators, and navigation.
To Next Page