Need help?Do you have a question about the Dell EMC PowerVault ME4024 and is the answer not in the manual?
General| Form Factor | 2U |
|---|---|
| Drive Bays | 24 |
| RAID Levels | RAID 0, 1, 5, 6, 10 |
| Power Supplies | Dual, Hot-swappable |
| Product Type | Storage Array |
| Number of Drives Supported | 24 |
| Storage Type | Block |
| Processor | Intel Xeon |
| Controllers | Dual |
| Host Connectivity | 12Gb SAS, 16Gb FC, 10Gb iSCSI |
| Drive Type Supported | SAS, SSD |
| Cache Memory | 16 GB per Controller |
| Operating System Support | Windows, Linux, VMware, Hyper-V |
| Management Software | ME Storage Manager |
Essential safety instructions to prevent injury and equipment damage during installation and operation.
Instructions for connecting power cables from PCMs or PSUs to the PDU for system power-up.
Steps to access the ME Storage Manager web interface for system configuration and management.
Procedures for manually setting static IP addresses or using DHCP for controller network ports.
Guidance on using the Storage Setup wizard to create disk groups and pools for the storage environment.
Procedures for attaching host servers to the storage system, referencing supported HBAs and network adapters.
To Next Page