Need help?Do you have a question about the Dell EMC PowerScale F600 and is the answer not in the manual?
General| Model | PowerScale F600 |
|---|---|
| Storage Type | Scale-out NAS |
| Form Factor | 2U |
| Drive Bays | 24 |
| Number of Drives | 24 |
| Maximum Raw Capacity | 1.5 PB |
| Raw Capacity per Node | Up to 1.5 PB |
| Power Supply | Redundant power supplies |
| Operating Humidity | 10% to 90% non-condensing |
| Drive Types | HDD, SSD |
| Processors | Dual Intel Xeon Scalable |
| Networking | 10/25 GbE |
| Protocols Supported | NFS, SMB, S3 |
| Scalability | Up to 252 nodes in a single cluster |
| Data Protection | Erasure coding, snapshots, replication |
| Node Types | Storage nodes |
| Operating Temperature | 10°C to 35°C |
Important safety warnings and notes regarding system installation, including lifting precautions and rack compatibility.
Step-by-step guide for installing left and right sliding rails into the cabinet, including marking and securing.
Instructions on securing rail assemblies to front and rear rack flanges using screws and washers.
Procedure for safely installing the node into the cabinet using extended rails, emphasizing two-person installation.
Guidance on sliding the system onto the rails and ensuring proper engagement of lock levers.
Detailed steps for pushing the system inward and engaging slam latches to secure the system within the cabinet.
Instructions for connecting power and I/O cables, managing cables with velcro straps or a CMA.
Configuration steps for the Integrated Dell Remote Access Controller (iDRAC) for remote administration.
Procedure for using the Isilon configuration wizard for setting up a new cluster or adding a node.
To Next Page