Need help?Do you have a question about the Dell EMC IDPA DP4400 and is the answer not in the manual?
General| Category | Storage |
|---|---|
| Form Factor | 2U |
| Max Capacity | 96TB |
| Data Protection | Yes |
| Replication | Yes |
| Deduplication | Yes |
| Deployment | On-premises |
| Connectivity | 10 GbE, 1 GbE |
| Power Supply | Redundant Power Supplies |
| Model | DP4400 |
| Type | Appliance |
| Use Case | Data Protection, Backup and Recovery |
| Data Protection Software | Dell EMC Avamar |
| Cloud Tier | Yes |
| Supported Workloads | Physical, Virtual, Cloud |
| Processor | Intel Xeon |
| Memory | Up to 768GB |
| Drive Types | SSD |
| RAID Support | RAID 6 |
Overview of components replaceable with or without system shutdown.
Guide to identifying the system using its Service Tag and Express Service Code.
Step-by-step instructions for safely shutting down the IDPA system.
Procedures to resolve issues during the IDPA system shutdown process.
Critical safety warnings and precautions for hardware servicing.
How to use the web interface for system health monitoring and alerts.
Procedures for identifying, removing, and replacing power supply units.
Information on hard drive types, carriers, and identifying faulty drives.
Steps for accessing and removing front and rear panel hard drives.
Procedures for accessing and removing internal hard drives.
How to verify successful hard drive replacement using the ACM.
Procedures for identifying, removing, and installing cooling fans.
Steps for removing and installing DIMM memory modules.
Procedures for removing and replacing M.2 modules on the BOSS card.
Steps for identifying, removing, and replacing Network Interface Controller cards.
Instructions for starting the IDPA system from Dell server or iDRAC.
To Next Page
