

Quick Start

trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of

their respective owners. P/N 300-015-628 Rev 01

Before you begin

□ Create a Dell EMC Online Support account:

dell.com/support. You will need this account later in the

installation process to activate software licenses and

configure Secure Remote Services.

□ Obtain the help of a second person to install the

enclosure into the rack or use a mechanical lift.

□ If you have more than one enclosure to install, use the

Unity 480/480F, 680/680F, 880/880F Installation and

Service Guide to complete your installation. The guide

includes racking and cabling instructions required for

additional enclosures, which are not covered here. The

Unity 480/480F, 680/680F, 880/880F Installation and

Service Guide is located on http://bit.ly/unityinfohub.

□ Download the Connection Utility at

http://bit.ly/unityinfohub. You need this utility to

assign static IP addresses to your system.

You do not need this utility if you plan to use DHCP to

automatically assign IP addresses to your system.

□ If you are installing your system in a location with

restricted internet access, download the Connection

Utility and your license files before starting the

installation process: http://bit.ly/unityinfohub.

□ Refer to the What’s next section for important details

about adding enclosures and using the Unisphere Online

Help.

Purpose of this document













































Dell EMC Unity 480 - Record Your System Serial Number; Cable the System to the Network

Table of Contents

Other manuals for Dell EMC Unity 480

Related product manuals