Replacing the display hinges
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Place the display-back cover and antenna assembly on a flat surface.
2 Align the screw holes on the display hinges with the screw holes on the
display back-cover and antenna assembly.
3 Replace the screws that secure the display hinges to the display back-
cover and antenna assembly.
4 Adhere the tapes that secure the display hinges to the display back-cover
and antenna assembly.
5 Route the antenna cables through the routing guide on the hinge cover
and secure it in place.
Post-requisites
1 Follow the procedure from step 4 to step 5 in “Replacing the display
panel”.
2 Replace the display assembly.
3 Replace the battery.
4 Replace the base cover.
83
To Next Page
Loading...
