Dell 13 7000 series - Removing the Display Cable; Prerequisites; Procedure

Removing the display cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the display assembly.
4 Follow the procedure from step 1 to step 2 in “Removing the display
panel”.
5 Follow the procedure from step 1 to step 2 in “Removing the camera”.
6 Remove the Windows-button board.
Procedure
1 Peel off the tape, lift the latch and disconnect the display cable from the
display panel.
90