19" LCD Color Monitor Dell 1908FPC
12
Normal Preset
Blue Preset
Red Preset
User Preset
Normal Preset is selected to obtain the default (factory) color settings. This setting
is also the “sRGB” standard default color space.
Blue Preset is selected to obtain a bluish tint. This color setting is typically used for
text based applications (spreadsheets, programming, text editors, etc.).
Red Preset is selected to obtain a redder tint. This color setting is typically used
for color-intensive applications (photograph image editing, multimedia, movies,
etc.).
User Preset: Use the plus and minus buttons to increase or decrease each of the
three colors (R, G, B) independently, in single digit increments, from 0 to 100.
OSD Settings:
Horizontal
Position
Vertical Position
OSD Hold Time
OSD Lock
Adjust the settings for the OSD, including the location, the amount of time the
menu remains on-screen, and the rotation of the OSD.
Position of the OSD:
● To adjust the horizontal position of the OSD, use the - and + buttons, and move
OSD to the left and right.
● To adjust the vertical position of the OSD, use the - and + buttons, and move
OSD down and up.
OSD Hold Time:
The OSD stays active for as long as it is in use. Adjusting the hold time, sets the
length of time the OSD remains active after the last time you pressed a button.
Use the - and + buttons to adjust the slider in 5 second increments, from 5 to 60
seconds.
OSD Lock:
Controls user access to adjustments. When Yes (+) is selected, no user
adjustments are allowed. All buttons are locked except the menu button.
NOTE: When the OSD is locked, pressing the menu button takes the user
directly to the OSD settings menu, with OSD Lock selected. Select No (-) to unlock
and allow user access to all applicable settings.
To Next Page
Loading...
Need help?
General