Dell 1908FPC User Manual

19" LCD Color Monitor Dell 1908FPC
15
or
or
OSD Warning Messages
One of the following warning messages may appear on the screen indicating that the monitor is out of
synchronization.
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the
signal is too high or too low for the monitor to use. See specifications for the Horizontal and Vertical frequency
ranges addressable by this monitor. Recommended mode is 1280 X 1024 @ 60Hz.
NOTE: The floating Dell Self-test Feature Check dialog appears on-screen if the monitor cannot sense a
video signal.
Occasionally, no warning message appears, but the screen is blank. This could also indicate that the monitor is not
synchronizing with the computer.
1. Auto Detect (Digital Input)
Cannot Display This Video Mode
Optimum Resolution 1280 x1024 60Hz
1. Auto Detect (Analog Input)
Cannot Display This Video Mode
Optimum Resolution 1280 x1024 60Hz
or
3. Digital Input
Cannot Display This Video Mode
Optimum Resolution 1280 x1024 60Hz
2. Analog Input
Cannot Display This Video Mode
Optimum Resolution 1280 x1024 60Hz
or

Dell 1908FPC Specifications

General

Screen Size	19 inches
Display Type	LCD
Resolution	1280 x 1024
Aspect Ratio	5:4
Panel Type	TN
Pixel Pitch	0.294 mm
Contrast Ratio	800:1
Brightness	300 cd/m²
Response Time	5 ms
Connectivity	VGA, DVI-D
Horizontal Refresh Rate	30 - 81 kHz
Color Support	16.7 million colors
Viewing Angle	160° (horizontal), 160° (vertical)
Vertical Refresh Rate	56 - 76 Hz
Power Consumption	40 W