19" LCD Color Monitor Dell 1908FPC
20
Note) continued
c. Extraneous substances which can be wiped out, like Finger Print, Particles, are not considered as a defect.
b. Defects which is on the Black Matrix(outside of Active Area) are not considered asa defect.
4.5.5 Foreign Material
* Maximum allowable number of defects for 3.2 & 3.3 : N<=8
4.5.6. Line Defect
All kinds of line defects such as vertical, horizontal or cross are not allowed.
4.5.7. Bezel Appearance
Scratches, minor bents, stains, particles on the Bezel frame are not considered as a defect.
4.5.8. Others
Issues which is not defined in these criteria shall be discussed with both parties, Customer and Supplier, for better
solution.
To Next Page
Loading...
