support.dell.com
Dell PowerEdge 2400 Systems Rack Installation Guide 1-1
Dell™ PowerEdge™ 2400 Systems
Rack Installation Guide
This installation guide provides instructions for trained service technicians installing
one or more DellPowerEdge 2400 computer systems in a Dell rack. One rack kit is
required for each PowerEdge system to be installed in the rack. The rack kit includes
the following items (see Figure 1-1):
• One pair of slide assemblies with mounting brackets*
• One rack adapter*
• One cable-management arm assembly
• One computer top cover assembly including shoulder screws and rack adapter*
• Four 8-32 x 0.313-inch pan-head Phillips-head screws*
• One 10-32 x 0.5-inch pan-head Phillips-head screw*
• Three shoulder screws*
* If you purchased a Dell rack with your PowerEdge system, some of the hardware may be
preinstalled in the rack.
To Next Page
Loading...
