Working with Quality of Service
3-DNS
®
Administrator Guide 8 - 7
6. Commit the changes to the configuration by typing:
3ndc reload
pool {
name <"pool_name">
[ ratio <pool_ratio> ]
dynamic_ratio yes
[ rr_ldns < yes | no > ]
[ rr_ldns_limit <number> ]
[ preferred < completion_rate | ga | hops | kbps | leastconn | packet_rate | qos |
random | ratio | return_to_dns | rr |
rtt | static_persist | topology | vs_capacity | null > ]
[ alternate < ga | kbps | null | random | ratio | return_to_dns | rr |
static_persist | topology | vs_capacity > ]
[ fallback < completion_rate | ga | hops | kbps | leastconn |
packet_rate | qos | random | ratio | return_to_dns | rr | rtt | static_persist |
topology | vs_capacity | null > ]
address <vs_addr>[:<port>] [ratio <weight>]
}
}
Figure 8.4 Enabling dynamic ratio in a pool configuration
To Next Page
Loading...
