Chapter 4
4 - 6
To rename or delete a VLAN using the Configuration utility
1. In the navigation pane, click Network.
The VLANs screen opens.
2. In the VLANs screen, use one of the following options:
• To rename a VLAN, click the VLAN name you want to change.
The VLAN properties screen opens. Type the new name in the
VLAN name box.
• To delete a VLAN, click the Delete button for the VLAN you
want to delete.
3. Click Done.
To create, rename, or delete a VLAN from the command line
To create a VLAN from the command line, use the following syntax:
b vlan <vlan name> interfaces add <if name> <if name>
For example, if you want to create a VLAN named myvlan that contains the
interfaces 1.1 and 1.2, type the following command:
b vlan myvlan interfaces add 1.1 1.2
To rename an existing VLAN, use the following syntax:
b vlan <vlan name> rename <new vlan name>
For example, if you want to rename the VLAN myvlan to yourvlan, type
the following command:
b vlan myvlan rename yourvlan
To delete a VLAN, use the following syntax:
b vlan <vlan name> delete
For example, to delete the VLAN named yourvlan, type the following
command:
b vlan yourvlan delete
To Next Page
Loading...
