System Setup Program A-11
Table A-6. Exit Menu Categories
Category Function
Save Changes and Exit Saves the changes you have made before
you exit the System Setup program. The
next time you boot up, the BIOS configures
your system according to the selections
stored in CMOS.
Exit Without Saving
Changes
Exits the System Setup program without
saving any of the changes you have made.
Get Default Values Loads the default values for each menu in
the System Setup program.
Load Previous Values Loads the values previously stored in
CMOS for each menu.
Save Changes Stores your changes in CMOS, but does not
exit the System Setup program.
To Next Page
Loading...
