Maintenance 27
NOTE: Dell may require lamps replaced under warranty to be
returned to Dell. Otherwise, contact your local waste disposal agency
for the address of the nearest deposit site.
6
Replace with the new lamp.
7
Tighten the screw that secures the lamp.
8
Replace the top cover and tighten the screw.
9
Reset the lamp usage time by selecting "Yes" for
Lamp Reset
in the OSD
Power Settings
of the
Advanced Settings
menu. When a new lamp
module has been changed, the projector will automatically detect and
reset the lamp hours.
CAUTION: Lamp Disposal (for the US only)
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST
BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE,
OR FEDERAL LAWS. FOR MORE INFORMATION, GO TO
WWW.DELL.COM/HG OR CONTACT THE ELECTRONIC INDUSTRIES
ALLIANCE AT WWW.EIAE.ORG. FOR LAMP-SPECIFIC DISPOSAL
INFORMATION, CHECK WWW.LAMPRECYCLE.ORG.
To Next Page
Loading...
