Dell 5000 Series - Setting Up the Enclosure

Feature
6. cable tie-off (17) to prevent accidental cable disconnection,
tie all cables to the cable tie-off guides.
7. cable conduit openings (8) route the cables through the conduits (1
inch and .75 inch diameter)
8. primary ground (internal) connect the grounding cable to the
system
9. primary ground (external) connect the grounding cable to the
system
10. door-stop cables (2) restricts the door from opening
11. door termal ribs dissipates the heat generated by the
system
Setting up the Enclosure
1 Install the Enclosure’s wall mount bracket at a desired location and secure it to
the wall using the wall mount screws.
NOTE: Ensure the notch on the bracket is on the top.
Enclosure Overview 54