Dell 5330dn - Page 20

USB
Parallel Port

Wireless(Only if wireless network interface card installed)
Clear Settings
6.Maintenance
7.Emulation
View Name
Displays the assigned AppleTalk
name.
View only
Menu selection:
Purpose:
Values:
USB
Enable or disable the USB port.
Enable
Disable
If this menu item is set to
Disable, the printer does not
work using USB port.
Menu selection:
Purpose:
Values:
Parallel Port
Enable or disable the Parallel
port.
Enable
Disable
Disable: The printer does not
work using Parallel port.
Menu selection:
Purpose:
Values:
WLAN Settings
You must configure the
appropriate network parameters
to use your printer in a wireless
network.
Search List
The wireless network interface
card in your printer searches for
wireless networks in the area
and shows the results.
Custom
You can configure the wireless
settings according to your needs.
WLAN Default
Performs a simple reset and
restores the factory-default
settings for the wireless network
configuration.
On
Off
WLAN Signal
Displays the signal sensitivity of
wireless.
View only
You can see any one of the
following: Excellent, Very Good,
Good, Low, Very Low and
Disconnected.
Menu selection:
Purpose:
Values:
Clear Settings
Performs a simple reset and
restores the factory-default
settings for the network
configuration. Requires restarting
printer to take effect.
Yes
No
Menu selection:
Purpose:
Values:
Clean Drum
If printouts are blurred, faded, or
smeared, correct the problem by
printing a cleaning sheet
provided with your printer.
Printing...
Clean Fuser
Printing...
Supplies Life
Allows you to check how many
pages have been printed and
how much toner is left in the
cartridge.
Total
Displays the total number of
pages printed.
Toner Remains
Displays the percentage of toner
remaining in the toner cartridge.
Toner Low Alert
When the toner cartridge is
almost empty, the printer
displays a shortage of the toner
message.
On
Off
Firmware Version
Displays the current firmware
version of the printer.
View only
Menu selection:
Purpose:
Values:
Emulation Type
The printer language defines how
the computer communicates with
the printer.
Auto
PCL
PostScript
HEXDUMP
Auto: Select to have printer can
change the printer language
automatically.
Setup
See the following tables to
configure properties of the printer
language.
PCL
PostScript
Downloaded from ManualsPrinter.com Manuals