4. Hold the toner cartridge by the handle and slowly insert the cartridge into the printer opening.
5. Tabs on the sides of the cartridge and corresponding grooves within the printer guide the cartridge into the correct position until it locks into place
completely.
NOTE: Do not use excessive force when inserting the cartridge into the printer. Ensure cartridge is placed correctly according to the tabs and grooves
before applying any pressure.
6. Close the top cover. Ensure that the cover is surely closed.
Replacing the Toner Cartridge
At this stage, the toner cartridge needs to be replaced.
Order an extra toner cartridge to have on hand when the current cartridge no longer prints satisfactorily. See "Ordering Supplies" to order toner cartridges.
To replace the toner cartridge:
1. Remove the new toner cartridge from its bag.
2. Locate the sealing tape at the end of the toner cartridge. Carefully pull the tape completely out of the cartridge and discard it.
NOTE: The sealing tape should be longer than 60 cm when correctly removed.
NOTE: Holding the toner cartridge, pull the sealing tape straight to remove it from the cartridge. Be careful not to cut the tape. If this happens, you cannot
use the toner cartridge.
3. Remove the flexible plastic holder out of the toner cartridge.
NOTE: For best results, use Dell toner cartridge. If you do not use Dell supplies, Dell does not guarantee print quality and printer reliability.
To Next Page
Loading...
Need help?
General